# Laminate vs Acrylic vs PU Kitchen Shutters in Mumbai: Which Finish Should You Choose?

Laminate, acrylic or PU for your Mumbai kitchen shutters? Compare look, durability, upkeep, monsoon behaviour and cost, and see which suits which kitchen.

Budget & Costs 

 
 By Bhavna Gangani 
 November 2026 
 10 min read 

 
 Kitchen Finish 
 Laminate 
 Acrylic 
 PU 

 

## What Is the Difference Between Laminate, Acrylic and PU Kitchen Finishes?

 The finish is the surface you see and touch on every kitchen shutter. Laminate is a decorative sheet pressed onto the board. Acrylic is a glossy sheet bonded to the board, known for its mirror-like depth. PU (polyurethane) is a paint-like coating sprayed onto the shutter in coats, giving a seamless matte or gloss surface; lacquer finishes are sprayed in a similar way. Each costs more than the one before, and each behaves differently in Mumbai's humidity, with oily Indian cooking and in a small, busy kitchen.

 The finish is usually the biggest single driver of a kitchen's price after the board and hardware. In our modular kitchen cost guide, the budget tier uses a foil finish, mid-range uses laminate or acrylic, and the premium tier uses PU or lacquer. This guide explains what you get for the extra money and which finish suits which kitchen.

 
 Quick Take 
 

- Laminate is the practical, lower-cost choice with the widest range of colours and textures. Choose it when budget and easy upkeep matter most.

- Acrylic gives a high-gloss, modern face that looks premium, but it shows fingerprints and scratches more, so it suits kitchens that are cleaned often.

- PU or lacquer gives a seamless, premium look with matte or gloss options and can be touched up or re-sprayed. It costs the most and depends heavily on the applicator's skill.

- The finish decides how the kitchen looks. The board and edge sealing decide how long it lasts in the monsoon, so choose both together.

 

## How Do the Three Finishes Compare?

 
 
 Laminate 
 

- A decorative sheet pressed onto the board, with edges banded

- Widest range of colours, woodgrains and textures

- Lowest cost of the three and easy to maintain

- The edges are the weak point, so sealing near the sink matters

 

 
 Acrylic 
 

- A glossy sheet bonded to the board, with a deep, reflective face

- Modern, handleless looks and rich solid colours

- Shows fingerprints and fine scratches more readily

- Needs gentle cleaning, not abrasive scourers

 

 
 PU / Lacquer 
 

- Coats of polyurethane or lacquer sprayed on, in matte or gloss

- Seamless, custom-colour surface with a premium feel

- Can be touched up or re-sprayed if it is damaged

- Highest cost, and quality depends on the applicator and curing

 

## How Does Each Finish Perform in Mumbai's Humidity and Oily Cooking?

 Mumbai kitchens deal with steam, humid air for much of the year and oil-heavy cooking, and each finish handles those differently. On laminate, the surface itself is tough and wipes clean, but water that reaches an exposed or poorly sealed edge can swell the board underneath. On acrylic, the face resists moisture well, but the same edge detail matters, and the gloss shows grease marks quickly. On PU, a well-applied, fully cured coat resists moisture and cleans easily, but a rushed or thin application can chip or yellow over time.

 In every case, what is under the finish matters as much as the finish. Our standard is BWR-grade plywood as the minimum for every kitchen carcass, with BWP (marine) grade recommended, especially for the sink base and in high-moisture homes. Our plywood guide for Mumbai kitchens explains the grades. A premium finish on a weak board is money spent on the wrong layer.

 The finish decides how the kitchen looks. The board and the edge sealing decide how long it keeps looking that way. 

## How Much Does Each Finish Cost?

 Finish is a major reason kitchen budgets move between tiers. For a standard 10 x 8 ft kitchen, our modular kitchen cost guide gives these cabinet ranges, which cover cabinets only and include the board, finish and hardware together:

 
 
 
 
 Tier 
 Cabinet cost (10 x 8 ft) 
 Typical finish and board 

 
 
 
 Budget 
 ₹1.5–2.5L 
 HDHMR or BWR plywood with a foil finish 

 
 Mid-range 
 ₹3–5L 
 Marine plywood with a laminate or acrylic finish 

 
 Premium 
 ₹6–10L 
 Marine plywood with a PU or lacquer finish and branded hardware 

 
 Luxury 
 ₹10L and above 
 Imported plywood, a membrane or quartz finish, Hettich or Blum hardware 

 
 

 These ranges bundle several choices together, so they are a guide, not a price for one finish on its own. A complete turnkey kitchen adds civil work, electrical, plumbing, the countertop, the backsplash and appliances, which typically adds 40 to 60 percent to the cabinet cost. To see how the finish changes the number for your own layout, use our modular kitchen cost calculator .

## Which Finish Suits Which Kitchen?

 
 
 Choose Laminate If 
 

- Budget and easy upkeep matter most

- You want woodgrains or textured surfaces

- It is a rental, a first home or a busy family kitchen

- You would rather spend on better board and hardware

 

 
 Choose Acrylic If 
 

- You want a high-gloss, modern, handleless look

- The kitchen is small and light reflection helps

- You clean surfaces often and accept visible marks

- You are in the mid-range and want a step up from laminate

 

 
 
 Choose PU or Lacquer If 
 

- You want a seamless, custom-colour, premium surface

- You value being able to touch up or re-spray later

- The budget allows for a skilled applicator and proper curing

- The kitchen is an open, visible part of the living space

 

 
 Mix Them If 
 

- You want a premium face where it shows and a practical finish elsewhere

- For example, PU or acrylic on the visible run and laminate on the inside of the carcass

- You want to control cost without losing the look

- The kitchen has a clear hero wall or island

 

## What Mistakes Do People Make When Choosing a Finish?

 

- Choosing by showroom sample alone. A small sample hides how a finish ages. Ask to see a finish in a delivered kitchen, not only on a board.

- Spending on the finish and cutting the board. A premium surface over a lower grade of board fails at the edges and near the sink first.

- Ignoring the edges. Edge banding and sealing near the sink and dishwasher determine how well any finish survives the monsoon.

- Picking high gloss without thinking about upkeep. Gloss looks stunning on day one and shows every fingerprint and splash afterwards.

- Not asking about touch-ups. Laminate is replaced, not repaired. PU can be touched up. Ask what repair looks like before you buy.

 

## What Should You Ask Before You Choose?

 

- Which board is under this finish, and to which grade and standard?

- How are the edges sealed, especially around the sink and appliances?

- Can I see this finish in a delivered kitchen that is at least a year old?

- How is the finish repaired or touched up if it is damaged?

- What does the warranty cover: the finish, the board, the hardware, or all three?

 

 

## Not sure which finish suits your kitchen?

 Send us your kitchen plan and your budget. We will tell you honestly where a premium finish is worth paying for and where laminate does the job.

 Book a Free Consultation on WhatsApp 

 

## Frequently Asked Questions

 
 Which is better for a kitchen, laminate or acrylic?

 
 Laminate is the more practical and lower-cost choice, with the widest range of colours and textures. Acrylic gives a glossy, modern face that looks more premium but shows fingerprints and scratches more easily. Choose laminate for upkeep and budget, acrylic for a high-gloss look in a kitchen you clean often.

 
 Is a PU finish worth the extra cost in a kitchen?

 
 It can be, if you want a seamless, custom-colour surface and the budget allows a skilled applicator and proper curing. PU can also be touched up or re-sprayed, which laminate and acrylic cannot. If budget is tight, put the money into better board and hardware first.

 
 What is the difference between PU and lacquer?

 
 Both are sprayed coatings applied in coats to give a seamless surface, and they sit together in the premium tier. The names are often used loosely in showrooms, so ask exactly what coating system is used, how many coats and how it is cured.

 
 Which kitchen finish is best for Mumbai's humidity?

 
 No finish is waterproof on its own. What matters most is the board underneath (BWR minimum, BWP recommended near the sink) and how well the edges are sealed. With those right, laminate, acrylic and a well-cured PU finish can all perform well.

 
 Which finish shows the least fingerprints and scratches?

 
 Textured laminate and matte PU hide marks best. High-gloss acrylic and gloss lacquer show fingerprints and fine scratches more readily and need regular, gentle cleaning.

 
 What finishes does DreamCircle use in kitchens?

 
 We build kitchens in-house across the finish tiers in our kitchen cost guide, on BWR plywood at minimum and BWP (marine) plywood where we recommend it, all under one fixed price after a site visit. Tell us the look and the budget and we will say which finish makes sense.

 
Planning your kitchen? See what a modular kitchen costs in Mumbai , compare modular and carpenter-made kitchens , or choose a countertop to match your finish.
